The NT 80/1 B1 MS (IP 54 approved) is a powerful, one-engined wet/dry vacuum cleaner with an intake cartridge air filter for the turbine and a cartridge type filter and paper filter bag as a pre-filtration (both filters are approved for dust class M). It is used for vacuuming medium hazardous dusts with MAK > 0.1 mg/m³.This unit features a compact fan housing, equipped with a continuous antistatic system, a stainless steel container and with complete accessory. If maxium liquid capacity is reached during wet pick-up, a double float system will stop the air flow rate to prevent overflow. When filter or suction unit - like suction hose, tubes, floor tool - are clogged or the air flow rate is lower than 20 m/s the signal light up. On the back side of the unit a floor tool holder is integrated. Two large back wheels and two castors (electrically conductive) - one with brake - give the NT 80/1 B1 MS high mobility.
Safety first
- The NT 80/1 B1 M S features automatic water level control and can only be operated with a sufficient water level.
Zone 22 + dust class M
- For combustible dusts in dust explosion classes, Zone 22 and health-endangering dusts, dust class M.
SPECIFICATIONS
Technical data
Current type (V/Hz)220 - 240 / 50 - 60Air flow (l/s)56Vacuum (mbar/kPa)235 / 23,5Container capacity (l)80Max. rated input power (W)max. 1380Standard nominal width40Cable length (m)10Sound pressure level (dB(A))70Weight without accessories (kg)32,5Dimensions (L × W × H) (mm)660 x 520 x 1078
Equipment
- Suction hose, 4 m
- Suction tube, 1 piece(s), 1 m, Metal
- Wet and dry floor nozzle, 370 mm
- Crevice nozzle
- Antistatic system
- Stainless steel container
- Cartridge filter, Paper
- Sturdy bumper
- Push handle
- Protection class, I
- Stop swivel castor
- Dust class, M
Henüz kullanıcı değerlendirmesi yok.
Yorum yapmak için üye olmanız gerekmektedir.
